Bestsellers Highways - Caltra Building Products

Rapid Reinstatement Concrete RRC15

Sun, 26 Sep 2021 15:37:15 +0000

Caltra Highways RRC15 is a fast-set high early strength concrete suitable for repairs large or small. Suitable for use in car parks, bridge decks, warehouses and farm buildings, it may be used for patch or full depth repairs.

• EN1504-3 R4
• High wear resistance
• Traffic in three hours
• Self priming
• High Slip/Skid Resistance (Class III)
• Resistant to Freeze/Thaw and De-icing salts
• Shrinkage compensated

Packaging:
225kg paper bags

Coverage:

The post Rapid Reinstatement Concrete RRC15 first appeared on Caltra Building Products.

Polyester Mortar PM04

Sun, 26 Sep 2021 14:11:29 +0000

Caltra PM04 is a HAPAS approved two component multipurpose polyester resin mortar for rapid bedding and fixing of utility access cover and frames, highways ironwork, duct frames and precast concrete units. It is particularly suited for use in critical locations and heavily trafficked areas. Supplied as a two pack fast-setting mortar it has been formulated for ease of use and easy placement.

• BBA/HAPAS accredited as a stand alone product.
• Use in any type of highway, no restrictions.
• Easy to Use
• Exceptional Strengths
• Rapid Return to Service
• Bed Depth 5-50mm

Packaging:
25kg tubs, 42 per pallet & 12.5kg tubs, 56 per pallet

Coverage:
25 kg will cover approx 1m2 @ 12.5mm

The post Polyester Mortar PM04 first appeared on Caltra Building Products.

Manhole Bedding Mortar MBM 90

Sat, 25 Sep 2021 17:25:19 +0000

Caltra Highways MBM90 is a single part, all-purpose, rapid strength concrete, specifically formulated for the bedding of access covers and general repairs. It is manufactured from a controlled blend of specially selected aggregates, cements, and additives and only requires the addition of water to produce a high quality bedding layer. MBM 90 is ideal for the rapid installation of Highway and residential manhole cover frames and similar ironwork drainage components and for the rapid installation of paving sets, flags, kerbs and manhole brickwork.

Meets the requirements for compressive strength in accordance with the MCHW, volume 1, series 500, clause 507 chambers, 44.

• Over 20N/mm2 within 2 hours
• Open to traffic in 90min
• Over 50N/mm2
• Low Shrinkage
• Frost Resistant

Packaging:
25kg bag, 48 per pallet

Coverage:

The post Manhole Bedding Mortar MBM 90 first appeared on Caltra Building Products.

Manhole Bedding Mortar MBM 60

Sat, 25 Sep 2021 17:23:44 +0000

Caltra Highways MBM 60 is a HAPAS approved single component, rapid setting cementitious mortar for the bedding of street and highway ironwork conforming to BS EN 124.
It is manufactured from a controlled blend of specially selected aggregates, cements, and additives and only requires the addition of water to produce a high quality bedding layer which can be trafficked after one hour. MBM 60 is ideal for the rapid installation of Highway and residential manhole cover frames and similar ironwork drainage components and for the rapid installation of paving sets and flags and kerbs.

Meets the requirements for compressive strength in accordance with the MCHW, volume 1, series 500, clause 507 chambers, 44.

• BBA/HAPAS accredited as a stand alone product.
• 20MPa at 1hr
• Over 60MPa after 28days
• 10 – 75mm bed depth in one pass
• Low shrinkage
• Frost resistant
• Open to traffic after 1 hr

Packaging:
25 kg bags, 48 per pallet and 20kg buckets, 42 per pallet

Coverage:
25 kg will cover 1m2 @ 12.5 mm

The post Manhole Bedding Mortar MBM 60 first appeared on Caltra Building Products.

Manhole Bedding Mortar MBM534

Sat, 25 Sep 2021 17:20:17 +0000

Caltra Highways MBM 534 is a two component, high performance bedding mortar providing all the benefits of a resin based mortar with the ease of use associated with cement based mortars. It is suitable for use in the installation, raising and reinstatement of ironwork, up to and including installation Group 4 of BS EN 124 where rapid trafficking is required and has exceptional performance in wet weather conditions.

HAPAS APPROVED – COMPLIES WITH:

MCHW, volume 1, series 500, clause 507 chambers, 44
MCHW, volume 1, series 500 clause 507 chambers, 24 (i), (iii) & (iv)

• Open to traffic in 60 mins
• 2hr compressive strength > 20 MPa
• 3hr compressive strength > 30 MPa
• 3hr tensile strength > 5 MPa
• 10 – 50mm bed depth in one pass
• Non-shrink
• Frost resistant

Packaging:
17.7kg bag & 2.3L bottle

Coverage:
1 bag (17.7kg) will cover approx. 1m2 @ 10mm

The post Manhole Bedding Mortar MBM534 first appeared on Caltra Building Products.