Floor Repairs - Caltra Building Products

Quickmix Rapid Repair Concrete

Claire McComb — Tue, 14 May 2024 10:52:49 +0000

QUICKMIX Rapid Repair Concrete is a blend of specially selected aggregates, cements, and additives to give a very fast setting cementitious patching screed mortar with high early strength. Rapid repairs can be carried out on screeds, pavements and factory floors with minimal obstruction and downtime. Rapid Repair Concrete can be used for other rapid setting applications, such as the bedding of manhole covers, etc. Rapid Repair Concrete is chloride-free, sulphate resistant and non-corrosive to reinforcing steel, and generally does not require
a bonding agent.

Fast-setting, early strength concrete suitable for large and small repairs.

Specially formulated rapid setting cement based patching/repair compound. Just mix with water.

30 Minute Set Time
Up to 150mm Depth
Easy Mixing
Internal & External Use

Packaging:

5KG

The post Quickmix Rapid Repair Concrete first appeared on Caltra Building Products.

Quickmix Rapid Repair Mortar

Claire McComb — Tue, 14 May 2024 10:44:46 +0000

QUICKMIX Rapid Repair Mortar is a very fast setting and drying cementitious patching mortar. It is ideal for internal and external repairs to floors, stairs, and steps and for reconstruction of edges/corners on precast units. Rapid Repair Mortar is chloride-free, non-corrosive to reinforcing steel and generally does not require a bonding agent.

A cementitious patching mortar, ideal for internal and external repairs to floors, stairs and steps.

Very Fast Setting (30 Minutes)
Rapid Drying
Up to 25mm Depth
Easy Mixing
Internal & External Use

Packaging:

5KG Bucket

The post Quickmix Rapid Repair Mortar first appeared on Caltra Building Products.

Injection Resin

Sat, 25 Sep 2021 15:55:12 +0000

Injection Resin is a low viscosity, solvent-free, epoxy resin-based crack injection system.

Injection Resin is mainly used for the repair of small, fine and hairline cracks in reinforced concrete structures. It can be used in dry, wet or damp conditions (no standing water) within an application temperature range of 5°C to 30°C. It can also be used as a stabiliser for weak and friable sand.

• Very high strength
• 80 N/mm2
• Bonds to dry and damp surfaces
• Non shrink

Packaging:
1kg packs

Coverage:
Dependent on the nature of the surface and usage. A 1kg pack produces approx. ~0.9L of resin

The post Injection Resin first appeared on Caltra Building Products.