It is ideal for fixing bolts, anchors, machine beds, stanchions, etc. or for repairing large cracks or voids. Multigrout EP is suitable for use in both dry and damp conditions and in areas subject to static and vibrating loads.

• 70MPa
• Epoxy Pourable
• 25N/MM2 in 8 Hours
• Non-Shrink
• Good Chemical Resistance

Packaging:
5kg (yield 2.5L)
Includes Part A, B & C

The post Multigrout EP first appeared on Caltra Building Products.

• EN1504-3 R4
• High wear resistance
• Traffic in three hours
• Self priming
• High Slip/Skid Resistance (Class III)
• Resistant to Freeze/Thaw and De-icing salts
• Shrinkage compensated

Packaging:
225kg paper bags

Coverage:

The post Rapid Reinstatement Concrete RRC15 first appeared on Caltra Building Products.

• BBA/HAPAS accredited as a stand alone product.
• Use in any type of highway, no restrictions.
• Easy to Use
• Exceptional Strengths
• Rapid Return to Service
• Bed Depth 5-50mm

Packaging:
25kg tubs, 42 per pallet & 12.5kg tubs, 56 per pallet

Coverage:
25 kg will cover approx 1m2 @ 12.5mm

The post Polyester Mortar PM04 first appeared on Caltra Building Products.

Multigrout requires only the addition of water to produce a highly fluid grout. It is mainly used for placing under machinery base plates, crane rails, bridge bearing pads, transformers, handrails and many other similar applications.

• High Early Strength
• >60 N/mm2 in 28days
• Non-Shrink
• No Bleed
• High Flow
• Chloride Free

Packaging:
25kg multiwall paper sacks

Coverage:
25kg bag will make approx. 14l of flowable grout

The post Multigrout 60 first appeared on Caltra Building Products.

Meets the requirements for compressive strength in accordance with the MCHW, volume 1, series 500, clause 507 chambers, 44.

• Over 20N/mm2 within 2 hours
• Open to traffic in 90min
• Over 50N/mm2 
• Low Shrinkage
• Frost Resistant

Packaging:
25kg bag, 48 per pallet

Coverage:

The post Manhole Bedding Mortar MBM 90 first appeared on Caltra Building Products.

Meets the requirements for compressive strength in accordance with the MCHW, volume 1, series 500, clause 507 chambers, 44.

• BBA/HAPAS accredited as a stand alone product.
• 20MPa at 1hr
• Over 60MPa after 28days
• 10 – 75mm bed depth in one pass
• Low shrinkage
• Frost resistant
• Open to traffic after 1 hr

Packaging:
25 kg bags, 48 per pallet and 20kg buckets, 42 per pallet

Coverage:
25 kg will cover 1m2 @ 12.5 mm

The post Manhole Bedding Mortar MBM 60 first appeared on Caltra Building Products.

HAPAS APPROVED – COMPLIES WITH:

• MCHW, volume 1, series 500, clause 507 chambers, 44
• MCHW, volume 1, series 500 clause 507 chambers, 24 (i), (iii) & (iv)

• Open to traffic in 60 mins
• 2hr compressive strength > 20 MPa
• 3hr compressive strength > 30 MPa
• 3hr tensile strength > 5 MPa
• 10 – 50mm bed depth in one pass
• Non-shrink
• Frost resistant

Packaging:
17.7kg bag & 2.3L bottle

Coverage:
1 bag (17.7kg) will cover approx. 1m2 @ 10mm

The post Manhole Bedding Mortar MBM534 first appeared on Caltra Building Products.

Meets the requirements for compressive strength and rapid construction in accordance with MCHW, volume 1, series 500, clause 507 chambers 44.

• BBA/HAPAS accredited as a stand alone product.
• Sets in 15min
• Over 20N/mm2 in 2 hours
• Waterproof packaging
• Shrinkage compensated

Packaging:
25kg 2 part poly-bag, 48 bags per pallet.

Coverage:
25kg will make 12L of concrete.

The post Manhole Backfill Concrete MBC10 first appeared on Caltra Building Products.

• One visit for Instant & Permanent Repair
• Open to Traffic Immediately
• All Weather use
• No Waste
• High Skid Resistance > 60PSV

Packaging:
25kg Poly Bag, 56 per pallet and 25kg Tub, 52 per pallet

Coverage:
1m2 at 15mm compacted

The post Instant Pothole Repair IPR 06 first appeared on Caltra Building Products.

• Easy to Use
• Cold Applied
• Prevents Water Ingress
• Reduces Risk of Freeze/Thaw Damage

Packaging:
500ml Aerosol Can 12 per box

The post Bitumen Edge Spray BES10 first appeared on Caltra Building Products.